JLG 3246E2 ANSI Parts Manual - Manual (Page 83)

3120738 3-11
SECTION 3 SCISSOR ARMS
S
E
C
T
I
O
N
3
S
C
I
S
S
O
R
A
R
M
S
.
FIGURE 3-3. SCISSOR ARMS INSTALLATION - 2032E2
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
SCISSOR ARMS INSTALLATION - 2032E2 OPTIONS: Ref.
0257528 Standard Machines Ref. Q
1 Not Used
2 0100011 Loctite #242 A/R
3 0100019 Loctite #271 A/R
4 0200558 Arm Weldment (Top Outboard) 1
5 0200559 Arm Weldment (Mid Outboard) 1
6 Arm Weldment (Bottom Outboard) 1
0200560 Prior to S/N 52737
0200645 S/N 52737 to Present
7 0200561 Arm Weldment (Top Inboard) 1
8 0200562 Arm Weldment (Mid Inboard) 1
9 0200563 Arm Weldment (Bottom Inboard) 1
10 Block, Pivot Options (Includes Item 58): 4
Use 0440238 Prior to S/N 62991 (Was p/n 0561312)
0440238 S/N 62991 to Present
11 0561278 Block, Pivot 1
12 0561301 Block, Slide 4
13 0641405 Bolt 1/4”-20NC x 5/8”” A/R
14 Not Used
15 0641508 Bolt 5/16”-18NC x 1” 2
16 Blot Options: 6
0681520 Blot 5/16”-18NC x 2 1/2” (Grade 8) (Prior to S/N 52737)
0630528 Blot 3/8”-16NC x 2 1/2” (Grade 8) (S/N 52737 to Present)
17 0641536 Bolt 5/16”-18NC x 4 1/2” 4
18 0692224 Bolt 3/4”-16NF x 3” 1
19 Not Used
20 0902385 Bracket, Platform Attach (Right Side) 1
21 0902386 Bracket, Platform Attach (Left Side) 1
22 Pad Options: 4
0940084 Pad, Bumper (Prior to S/N 49086)
0940087 Bumper, Arm (S/N 49086 to Present)
23 Bushing, Excelite 6
0962096 Prior to S/N 49086
0440227 S/N 49086 to Present
24 Bushing, Excelite 24
0962097 Prior to S/N 49086
0440228 S/N 49086 to Present
25 Not Used
26 1100105 Cam, Activator 1
27 1683561 Lift Cylinder Assembly (See Section 5 for Breakdown) 1
28 0962207 Bushing, Spacer (S/N 52737 to Present) 2
29 3310801 Nut #8-32NC 2
30 3311505 Locknut 5/16”-18NC 2
31 Not Used
32 3422641 Pin, Pivot 2
33 3422642 Pin, Headed 2