Ac circuit breaker replacement, Dc circuit breaker replacement – JLG T350 Service Manual User Manual
Page 128
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-92
– JLG Lift –
3121198
AC Circuit Breaker Replacement
1. Disconnect wiring connected to the breaker poles.
2. Remove the two (2) nuts securing the AC breaker to
the chassis screws.
3. Remove the breaker from the chassis.
DC Circuit Breaker Replacement
1. Remove the wiring from the DC breaker terminals.
2. To remove the breaker from the front face of the
charger, on the inside of the charger front face, push
in on the tabs located on the sides of the breaker
assembly and remove the breaker out the front of
the charger.
LOCKING
TABS
Advertising