JLG T350 Service Manual - Manual (Page 135)

SECTION 4 - BOOM & PLATFORM
3121198 – JLG Lift – 4-3
2. Remove the bolt, keeper pin, and upper pivot pin
securing the platform pivot.
3. Remove the pivot from the boom assembly.
NOTE: The pivot weighs approximately 19 lbs. (9 kg).
4. Remove the slave cylinder. Refer to Section 4.4,
Slave Cylinder.
5. Remove the bolts securing the telescope cylinder to
the boom base section.
6. Remove the retaining rings and attach pins securing
the telescope cylinder to the boom fly section.
7. Pull the telescope cylinder out from the rear of the
boom.