JLG T350 Service Manual - Manual (Page 15)

SECTION 1 - SPECIFICATIONS
3121198 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 OPERATING SPECIFICATIONS 1.2 CAPACITIES
1.3 ELECTRIC POWER UNIT
1.4 TIRES
Table 1-1. Operating & Towing Specifications
Tongue Weight (ANSI): 252 lbs.(114 kg)
Maximum Allowable Tow Speed:
(Do NOT exceed legal speed limit) 65 mph
(105 kph)
Maximum Work Load (Capacity)
w/Rotator 440 lbs.
(200 kg)
Maximum Work Load (Capacity)
w/o Rotator 500 lbs.
(230 kg)
Maximum Work Load (Capacity)
w/Rotator & Panel Tray 320 lbs.
(145 kg)
Maximum Work Load (Capacity)
w/o Rotator & w/Panel Tray 350 lbs.
(158 kg)
Material Hook Capacity (Optional) 500 lbs.(230 kg)
Accessory Tray Capacity 250 lbs.
*
(114 kg)
Panel Tray Capacity (w/Rotator) 70 lbs. (32 kg)
Panel Tray Capacity (w/o Rotator) 100 lbs. (45 kg)
Swing 410° non-continuous
Max.Vertical Platform Height (Unrestricted) 35 ft. (10.6 m)
Vertical Reach (unrestricted) 35 ft. (10.4 m)
Horizontal Reach
(from centerline of machine)
(from outrigger pad edge)
20 ft. (6.1 m)
14 ft. (4.27 m)
Up and Over Clearance 15 ft. (4.57 m)
Maximum Outrigger Load 1950 lbs. (884.5 kg)
Maximum Ground Bearing Pressure
22.5 psi (1.58 kg/cm 2 )
Maximum Travel Gradeability - ANSI, CSA,
AUS
20%
Maximum Travel Gradeability - CE 15%
Maximum Sideslope - ANSI, CSA, AUS 11°
Maximum Sideslope - CE 8.5°
Maximum Horizontal Manual Force 90 lb. force (400 N)
Electrical System Voltage - Electric Machine 24 volts
Electrical System Voltage - Gas Machine 12 volts
Gross Machine Weight (Platform Empty)
ANSI/CSA/Australian Machines
3330 lbs. (1510 kg)
Gross Machine Weight (Platform Empty)
CE Machines
3748 lbs. (1700 kg)
*
DO NOT exceed axle rating or GVW rating.
Table 1-2. Capacities
Fuel Tank 1.6 Gal. (6.0 L)
Hydraulic Tank
Filling Volume
Usable Volume
4.4 Gallon (16.65 Liters)
4.0 Gallon (15.1 Liters)
Engine Crankcase 1.16 qt. (1.0 Liter)
Table 1-3. Electric Power Unit Specifications
@ 740PSI
(51 Bar)
@1500PSI
(103 Bar)
@ 3000PSI
(207 Bar)
Motor Power 3.0 kW 3.0 kW 3.0 kW
Voltage 24 VDC 24 VDC 24 VDC
Amperage 90 140 230
Speed 4000 rpm 3600 rpm 2900 rpm
Short Term
Operation
9 min-
utes
6 min-
utes
2 minutes
Intermittent
Operation
28% 19% 10%
Pump Flow Rate 3.0 gpm
(11.3
lpm)
2.7 gpm
(10.2
lpm)
2.2 gpm
(8.3 lpm)
Displace-
ment
0.192 cu.in.
(3.15 cc)
Table 1-4. Tire Specifications
(ANSI) (CE)
Size 205-R14 185-R14C
Load Rating 1760 lbs. @ 50
psi
(798 kg @ 345
kPa)
1984 lbs. @ 65
psi
(900 kg @450
kPa)
Ply Rating/Load Range 6/C 8/D
Weight 36 lbs. (16 kg) 36 lbs. (16 kg)
Speed
Category
- - S
Inflation Pressure 50 psi (345 kPa)
Wheel Nut Torque 90-120 ft. lbs.
(122-164 Nm)
66 ft. lbs.
(90 Nm)