ACU-RITE ENC 125 T/E User Manual
Page 9
Mounting options can be adapted to machine mounting
surfaces using spacers, standoffs, leveling set screws. A
spar can be used for the ENC 125 E encoder.
• Measuring length and mechanical configuration of your
machine determine your options.
• Fastener lengths described on this page are included with
the encoder or the backup spar.
• Mounting can be direct to the machine surface or with the
aid of leveling blocks or spacers.
• For use with ENC 125 E scale case only.
7
Acu-Rite Companies Inc.
ENC 125 T/E
Mounting Requirements
ENC 125 T
1/4-20 x 1/2” BHCS
& M6 Flat washer
Backup spar mounting
for ENC 125 E encoder
• Mounting can be direct to the machine surface or with the
aid of leveling blocks, spacers or back up spar.
M4 x 8mm SHSS
ENC 125 E
M5 Flat washer
10-32 x 1-1/4” SHCS
M3 x 8mm SHSS (3)
8-32 x 1” SHCS (2)
1/4-20 x 1/2” BHCS (2)
8-32 x 1” SHCS (2)
M3 x 8mm SHSS (3)
M6 Flat washer x .017” thk. (2)
Mounting hole cover (2)