ADS-TEC MCR5000 - Manual (Page 16)

Industrial PCs MCR5000
16
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
R
EMOVING THE LOCKING PLATE
The locking plate on the device must be removed in order to continue with the installation.
This is done by opening the lock and by removing the locking plate upwards.
R
EMOVING THE INSTALLATION BRACKET
For removing the installation bracket it is required to unhinge the previously attached
brackets or retainers. In this case, the MCR 5000 must be supported by another person.
The installation plate is unhinged after removing both safety screws from the MCR 5000.