ADS-TEC MCR5000 - Manual (Page 8)

Industrial PCs MCR5000
8
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
1.7 S
TANDARDS
This device complies with the requirements and protective aims of the following EC
regulations:
• This device meets the test requirements for granting the CE sign and according to
the European test standards EN 61000-6-3: 2001+ A11:2004 and EN 61000-6-2:
2005
• This device complies with the test requirements in accordance with DIN EN 60950-
1:2001 (VDE0805, IEC950) "Safety of Information Technology Equipment"
• The device meets the DIN EN 60068-2-6 test requirements (sinus excitation).
• The device meets the DIN EN 60068-2-27 test requirements (shock resistance
test).
Note:
A respective conformity declaration for the authority in charge is available on request
from the manufacturer.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened bus and
LAN cables including screened connectors must be used and installed according to the
instructions in this user manual.