ADS-TEC MCR5000 - Manual (Page 19)

Industrial PCs MCR5000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
19
M ONITOR INSTALLATION AT THE MCR 5000
Warning:
The installation procedure described below must be carried out by at least 3 persons, due
to the weight of the equipment.
Fix the monitor to the MCR 5000 device by using the pre-installed installation bracket.
Note:
The figure shows the installation bracket from the point of view of the monitor. Please
take care that the monitor plate is properly pushed into the guides provided on the MCR
5000 case when attaching the monitor.