ADS-TEC MCR5000 - Manual (Page 26)

Industrial PCs MCR5000
26
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.2 USB CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection.
PIN NUMBER SIGNAL NAME
1 VDC
2 D -
3 D+
4 GND
Note:
The USB interfaces may be locked using the Lock USB software tool. You'll find the
software and the documentation on the service CD.
T OP USB INTERFACE
One USB interface can be accessed from the front. The interface is located under a plastic
cover. The cover has a tab on the right, which is used for protecting the USB connection.
Note:
All USB interfaces available meet the USB 2.0 standard.
5.3 S IM C ARD R EADER ACCORDING TO ISO 7816
The SIM card reader is currently under preparation for future use.