ADS-TEC MCR5000 - Manual (Page 30)

Industrial PCs MCR5000
30
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.9 AUDIO L / R
D ESCRIPTION A UDIO INTERFACE
The MCR 5000 is equipped with
an S/PDIF interface. Analogue
audio signals may be played on
other pieces of equipment by
using a commercially available
cinch cable. The Audio L / R
cinch input jack allows
transmitting analogue audio
signals to other pieces of
equipment. The input jacks
may be connected with
commercially available cinch
cables.
Note:
The integrated stereo speakers may be enabled or disabled by using the "Internal
Speaker Control" extension module. You'll find a detailed documentation for installation of
this extension module on the service CD supplied with the equipment.