Blue Sea Systems 1801 Vessel Systems Monitor VSM 422 - Manual (Page 22)

40
Specifications subject to change. See www.bluesea.com for current information.
39
Tank Configuration (Auto Calibration Procedure 2)
7. When tank is empty press SELECT on Start Calibration.
Fill tank at a steady rate.
8. When the tank is full press SELECT.
9. Enter metered amount as fill amount using the Character
Selection method. (page 13)
10. Press EXIT.
11. Press any key to continue.
12. Press EXIT.
13. Repeat Tank Setup starting with step 3 for all remaining tanks.
Specifications subject to change. See www.bluesea.com for current information.