Blue Sea Systems 1801 Vessel Systems Monitor VSM 422 - Manual (Page 37)

70
Specifications subject to change. See www.bluesea.com for current information.
69
Battery Temperature Alarm Setup
1. Page through main screens by pressing NEXT until the
STATE OF CHARGE page is visible.
2. Press SETUP
3. Scroll to and press SELECT on Soc Alarms.
4. Scroll to and press SELECT on Batt Temp Alarms.
5. Press SELECT on Set High Limit. Use the Scroll Bar method to set limit.*
* If metric units of measure are selected (page 17) the High Limit range will be 48–82.
6. Press EXIT three times to return to main system screens.
Specifications subject to change. See www.bluesea.com for current information.