Blue Sea Systems 1801 Vessel Systems Monitor VSM 422 - Manual (Page 24)

44
Specifications subject to change. See www.bluesea.com for current information.
43
Tank Configuration (Auto Calibration Procedure 3)
7. Press SELECT on Start Calibration.
Fill tank at a steady rate.
8. When the tank is full press SELECT.
9. Enter (100 - Start Estimate Percent) as fill amount using the Character
Selection method. (page 13)
10. Press EXIT.
11. Press any key to continue.
12. Scroll to and press SELECT on Set Tank Capacity.
Specifications subject to change. See www.bluesea.com for current information.