Blue Sea Systems 1801 Vessel Systems Monitor VSM 422 - Manual (Page 9)

14
Specifications subject to change. See www.bluesea.com for current information.
13
INITIAL SYSTEM SETUP
Many setup screens require that the user enter data. There are two methods
of entering data.
Scroll Bar Method:
The numbers on the left and right represent the high and low range of the
value selected, and the number in the middle is the current value. To adjust
the value use the <- and -> buttons. Turn off an alarm by scrolling all the
way to the left for a low limit or all the way to the right for a high limit. The
current value will show OFF. Pressing SELECT will set the value; pressing
EXIT will cancel the change.
Character Selection Method:
Change the value by selecting the character using the <- and -> buttons and
pressing SELECT when the character is highlighted. The left two buttons
then become A<-Z and A->Z if a name is being changed or 0<-9 and 0->9
if a number is being changed. Use these buttons to change to the desired
value for the character. Numerals 0 through 9 and a blank space are
available after Z when the characters are in the “name” mode. Press
SELECT to lock the character. The buttons will then return to <- and -> and
another character can be highlighted. When all of the characters have been
set press EXIT.
Specifications subject to change. See www.bluesea.com for current information.