CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 30)

29 DIGITAL VIDEO RECORDER
V. OPERATION
1. LOG IN/OUT.
You must log on to the DVR with valid password to operate the DVR. By default, it comes
with one login account; ADMIN and the default password is “000000”.
<Note >
If you are logging on for the first time, the system does not prompt you to change the default
password. Therefore, it‟s strongly recommended to change the “PASSWORD” when you
install the DVR. Refer to [System Setup].
1. Login
1) On the front panel or remote control, press the power button.
2) When the DVR is powered on, it will start to scan DVR status.
3) Live Viewing screen will appear after initialization about 50sec. It can be delayed
when you have defect HDD, it will try to fix for logical problem but it will show you
warning message for physical problem.
4) On the front panel or remote control, press Login. Using the mouse, click wherever.
the login dialog box pops up.
5) Login Icon will be displayed on status bar.
2. Logout
On the front panel or remote control, press LOGIN. Using the mouse, click wherever
on monitor, Virtual remote control will be appeared. The login icon will be
disappeared on starts bar, indication you are logged off.