CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 51)

50 DIGITAL VIDEO RECORDER
2. Ethernet 2.
1) Static : If the Static IP is selected, the following settings are available:
a) ETH.2 IP Address : Enter the static IP address
b) ETH.2 Netmask : Enter the IP address of subnet mask.
2).DHCP: Dynamic Host Configuration Protocol.
It is automatically set on from Local DHCP if there is Local DHCP server (i.e. The
local Router) . if the DHCP is set to ON, the IP address, Gateway and subnet Mask
will be assigned by DHCP server.(i.e.The local area network Router)
6.2. GENERAL
1. Access Port:
Select “0001 ~ 9999”
Enter the port number that the client will use to communicate with the DVR over the
internet. The default port is 7000. It is recommended to use over 1,000.
2. Bandwidth: Select the network bandwidth to limit the amount of network resources
allocated to client connection.The default is unlimited: “
4 KBPS~ 8 MBPS ”
3. Ping Block: No response for ping. Default by off.
4. Scan Block: No response for Auto Scan from EMS. Default by OFF