CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 61)

60 DIGITAL VIDEO RECORDER
7.3. PTZ EVENT
When such as alarm trigger, motion detected or video loss occurs, this DVR sends preset
command to PTZ camera. PTZ option must be enable and a protocol must be assigned to
the camera channel.
1. Channel: Select desired PTZ camera.
2. Active: configure PTZ action [ NONE  GOTO  TOUR ] and Preset number or Tour
group when event detected.
3. Inactive: Select Camera position after event duration expires.
4. Event Edit.
Press [enter] to edit multiple event. The menus are displayed with options on the left-
hand column and settings in the right hand column. A cursor (highlighted menu) can
be moved using the Direction buttons [ ] on IR remote or front panel.
<Note>
Do not set up Motion detection on PTZ camera for PTZ event. The signal will be looping
5 . Save changes and exit the menu, press [MENU] button.
Exit the menu without making changes, press [CANCEL] button.
③
④
①
②