CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 77)

76 DIGITAL VIDEO RECORDER
4.Log List Search
The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
１. To start Event Search, press [Log] button on IR Remote, then Log List Menu
pops up, as shown below.
MENU TAP CONDITION
ALL  It has a list of all the events since the initial power on procedure of DVR
SYSTEM  It shows All System List.
NETWORK  It shows NETWORK List.
EVENT  It shows All Event except for Alarm, Motion, Video Loss and System.
VIDEO LOSS  It shows Video Loss List.
2. Use Up/Down buttons [] to desired “Time” to playback. Use Left/Right buttons
[] to move NEXT page.
3. Press [ENTER] button to start playback.
<Note> Log list is saved on HDD.