CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 62)

61 DIGITAL VIDEO RECORDER
8. SYSTEM
8.1. GENERAL
1. Control ID: Each DVR that is preconfigured with the control ID is enabled to respond
to and be operated by the remote control.
- To select the DVR to be controlled with the remote controller, press and hold the DVR
ID button. While holding the DVR ID button, press the appropriate DVR ID number.
For example, enter 05 for DVR ID 05, enter 43 for DVR ID 43, and such. Set the ID of
IR controller on “00” to control DVRs at the same time, whatever DVR ID are.
2. DVR Name : Type the DVR name to distinguish location when you have several
DVRs on Network.
3. KEY TONE By default, the DVR emits a beep every time a button is pressed. Set the
key tone to off to turn button beep off. Default by “ON”
4. PB DEINTERLACE
 ON: Reducing image flickering but less picture quality.
 OFF: Better picture quality for still image but having flicker for moving picture.
5. AUTO LOGOUT : You can configure the DVR to automatically log out users. Default
by “OFF”.
[OFF  1 Minute  3 Minute 5 Minute 10 Minute]