CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 53)

52 DIGITAL VIDEO RECORDER
2) Log: This DVR will mail Log list at selected intervals.
4. Attach Picture: While you are in recording mode, picture can be attached for mail.
5. E-mail Address: 5 mail addresses can be configured for mail notification.
6.4. SMTP
This menu will be activated when you check <SMPT> on EMAIL.
The following settings are only needed if you are NOT using the DVR mail server.
1. Server: Enter the e-mail server name or IP. To server name, using the virtual
keyboard, or pressing appropriate Numeric button on IR Remote or front panel.
2. Port : Define the port that the SMTP server will communicate through. By default, it
set to 25.
3. Authentication: Check this <on> if your mail server requires authentication.
4. User ID & Password: Enter the user ID/name and password for the SMTP Server.
(It is recognized as a small letter, even it‟s displayed as a Capital Letter).
5. Enter the password for the SMTP Server.
6. Save changes and exit the menu, press [MENU] button.
Exit the menu without making changes, press [CANCEL] button.