CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 68)

67 DIGITAL VIDEO RECORDER
VII. PAN/TILT ZOOM CONTROL
PTZ control is available for supported third-party dome cameras. The PTZ option must be
configured for each camera channel. For PTZ setup, refer to Camera Menu> PTZ setup.
The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote
controller. Menu button is the guide anchor position for all other buttons. When in PTZ
interface mode, all buttons used for the PTZ related operation.
1. P.T.Z .Menu
1) To activate the Pan/Tilt Control, select the full screen display of the camera you wish
to control.
2) Then press the [ P/T/Z/FOCUS ] button. Shortcut Menu box pops up, as shown below.
INDICATOR ACTIONS
[ENTER]
[CANCEL]
 Press this button to display “HELP” Menu. Press [ENTER] Button again, or
[CANCEL] button to cancel Help Menu.
 Press this button to cancel “PAN/TITL” Operation.
[MENU] Button
 PTZ camera control interface will be extended to use whole function. Press
this button again to make short-cut menu.
Direction Button
 To Tilt up and Down.
 To pan Right and Left.
+ , - Button  Zooming In and Out.
<Note > Please Refer to Help Menu for specific control.