Network, Ethernet – CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual User Manual

Page 50

Advertising
background image

49 DIGITAL VIDEO RECORDER

6. NETWORK

The static service consists of an IP address that remains constant for the duration of the

contract of the internet service, whereas the dynamic service consists of an IP address that

frequently changes every time a new connection is made through the provided modem, or

recurrently in a given period of time. Though most internet service providers offer both

solutions, this manual will distinguish the two solutions according to the commonly available

service type to configure the DVR for the networking purposes.

6.1. ETHERNET

This model supports two Ethernet port. Even though the one port is not connected, it can be

connected by the other port.

1. Ethernet 1.

1) Static : If the Static IP is selected, the following settings are available:

a) IP Address : Enter the static IP address

b) Netmask : Enter the IP address of subnet mask.

c) Gateway: Enter the IP address for the internet gateway server.

d) PRI.DNS Server: Verify the name of the domain name system.

e) SEC.DNS Server: Enter the IP address of the backup domain name system (DNS)

server that the DVR will use to convert name to IP address. This server is used if the

primary DNS server fails.

<Note>

if you do not set up DNS server correctly, it will have problem with mail sending.

2).DHCP: Dynamic Host Configuration Protocol.

It is automatically set on from Local DHCP if there is Local DHCP server (i.e. The

local Router) . if the DHCP is set to ON, the IP address, Gateway and subnet Mask

will be assigned by DHCP server.(i.e.The local area network Router)

Advertising