CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual - Manual (Page 42)

41 DIGITAL VIDEO RECORDER
b. Event Edit
- Press [enter] to edit multiple event. The menus are displayed with options on
the left-hand column and settings in the right hand column. A cursor
(highlighted menu) can be moved using the Direction buttons [ ] on IR
remote or front panel.
- Change below options using [DEC/INC] buttons on IR remote or Clicking by
mouse.
- System menu will not activated in this section
3.4 Continuous + Event (Motion/Alarm) Recording
Both Continuous and Event recording can be set at the same time. The DVR record
video data continuously over 24 hour period but when Event occurs recording speed
and picture quality can be adjusted different from continues recording.
<Example>
By pressing the REC button, Normal recording starts with High picture quality at 3F/S.
When Event is triggered on this channel, it changed to record with Super picture
quality at 30 F/S . It will be back to Normal Recording after Event duration is end.
<Note>
Please determine Event source such as Motion, Alarm, Video Loss on DAY EVENT tap