DATOptic RM12-S6.TB - Rackmount - Manual (Page 15)

WEB BROWSER-BASED CONFIGURATION
124
6.5.5 Rename Raid Set
The default RAID set name will always appear as “Raid Set #”
when it is first created by the controller. The "Rename Raid Set"
function is for customer to rename the default RAID set name.
To rename a RAID set from a group of RAID sets:
(1). Click on the ”Rename Raid Set" link.
(2). Click the RAID set check box from the list that you wish to
rename. Click the “Submit” button. The following screen appears.
Use this option to rename the RAID set name.
6.5.6 Activate Incomplete Raid Set
If one of the disk drives is removed in power off state, the RAID
set state will change to “Incomplete State”. If the user wants to
continue to operate the controller without power-off the 6Gb/s
SATA RAID controller, the user can use the “Activate Incomplete
Raid Set” option to active the RAID set. After the user completes
this function, the Raid State will change to “Degraded Mode” and
start to work.
To activate the incomplete the RAID set, click on the “Activate
Raid Set” link. A “Select The RAID SET To Activate” screen is