DATOptic RM12-S6.TB - Rackmount - Manual (Page 32)

141
WEB BROWSER-BASED CONFIGURATION
• System Beeper Setting
The “System Beeper Setting” function is used to “Disabled” or
“Enabled” the 6Gb/s SATA RAID controller alarm tone generator.
• Background Task Priority
The “Background Task Priority” is a relative indication of how
much time the controller devotes to a rebuild operation. The
6Gb/s SATA RAID controller allows the user to choose the re-
build priority (UltraLow, Low, Medium and High) to balance vol-
ume set access and rebuild tasks appropriately. For high array
performance, specify a “Low” value.
• JBOD/RAID Configuration
JBOD is an acronym for “Just a Bunch Of Disk”. A group of
hard disks in a RAID box are not set up as any type of RAID
configuration. All drives are available to the operating system as
6.8 System Controls
6.8.1 System Config
To set the RAID system function, move the cursor to the main
menu and click the “System Controls” link. The “Raid System
Function” menu will show all items, and then select the desired
function.