DATOptic RM12-S6.TB - Rackmount - Manual (Page 2)

111
ARCHTTP PROXY SERVER INSTALLATION
5.5 For Mac OS 10.X
The ArcHttp proxy server is provided on the software CD delivered
with 6Gb/s SATA RAID controller or download from the www.areca.
com.tw. The firmware embedded McRAID storage manager can
configure and monitor the 6Gb/s SATA RAID controller via ArcHttp
proxy server. The Archttp proxy server for Mac pro, please refer to
Chapter 4.6 "Driver Installation" for Mac 10.X.
5.6 ArcHttp Configuration
The ArcHttp proxy server will automatically assign one additional
port for setup its configuration. If you want to change the "archttp-
srv.conf" setting up of ArcHttp proxy server configuration, for
example: General Configuration, Mail Configuration, and SNMP
Configuration, please start Web Browser http:\\localhost: Cfg As-
sistant. Such as http:\\localhost: 81. The port number for first con-
troller McRAID storage manager is ArcHttp proxy server configura-
tion port number plus 1.
• General Configuration:
Binding IP: Restrict ArcHttp proxy server to bind only single
interface (If more than one physical network in the server).
HTTP Port#: Value 1~65535.
Display HTTP Connection Information To Console: Select “Yes" to
show Http send bytes and receive bytes information in the console.
Scanning PCI Device: Select “Yes” for ARC-1XXX series controller.
Scanning RS-232 Device: No.
Scanning Inband Device: No.