DATOptic RM12-S6.TB - Rackmount - Manual (Page 24)

133
WEB BROWSER-BASED CONFIGURATION
function can support the “Volume Modification” function. To
expand the last volume set capacity, move the cursor bar to
the “Capacity” item and entry the capacity size. When finished
the above action, click on the "Sumbit" button to complete the
action. The last volume set starts to expand its capacity.
To expand an existing volume noticed:
• Only the last volume can expand capacity.
• When expand volume capacity, you can’t modify stripe size or
modify RAID level simultaneously.
• You can expand volume capacity, but can’t reduce volume
capacity size.
• After volume expansion, the volume capacity can't be
decreased.
For greater 2TB expansion:
• If your system installed in the volume, don't expand the
volume capacity greater 2TB; except your OS and RAID
controller can support boot up from a greater 2TB capacity
device.
• Expand over 2TB used LBA64 mode. Please make sure your
OS supports LBA64 before expand it.
6.6.4.2 Volume Set Migration
Migrating occurs when a volume set is migrating from one RAID
level to another, when a volume set strip size changes, or when
a disk is added to a RAID set. Migration state is displayed in the
volume state area of the “Volume Set Information” screen.