Elkhart Brass Sidewinder 7100 EXM Monitor User Manual
Page 17
17
Installation Step 2: Configure the EXM System
NOTE: EXM systems using CAN communication and consisting of a monitor and one controller (panel
mount or OEM interface) do not require configuration. EXM monitors and controllers come factory set
for CAN termination. A position feedback display can also be used without the need for configuration;
as long as it is connected to the main CAN line (see CAN connector kit) between the monitor &
controller. The monitor & controller must be at the extreme ends of the main CAN line to provide CAN
termination.
If the system requires configuration, please refer to the EXM System Configuration Manual (P/N
98510000) for configuration instructions. You can find the most current manual at
www.elkhartbrass.com
.