Vl logic supply – ElmoMC Gold Line Digital Servo Drives-Gold Drum Ver 1_400 RJ-45 connectors User Manual
Page 29
Advertising
Gold Drum (RJ-45 Connectors) Installation Guide
MAN-G-DRUM(RJ45)IG-EC (Ver. 1.400)
||VL Logic Supply
29
9.6. VL Logic Supply
Connect the VL Logic power supply as described below.
To connect the VL Logic supply:
1.
Use a 24 – 26 AWG twisted pair shielded cable. The shield should have braid and Drain wire.
2.
The source of the VL supply must be isolated from the Mains.
3.
Before applying power, first verify that the polarity of the connection is correct.
Figure 13: VL Logic Supply Connection Diagram
Advertising