Port c – emulated encoder output – ElmoMC Gold Line Digital Servo Drives-Gold Duo User Manual
Page 45
Advertising
Gold Duo Installation Guide
MAN-G-DUOIG-E (Ver. 1.500)
||Feedback Port C and I/O
45
6.8.1.
Port C – Emulated Encoder Output
The following figure describes the connections at Port C for the Emulated Encoder Differential.
Figure 26: Emulated Encoder Differential Output – Recommended Connection Diagram
Note that the user is required to connect a 120 Ω termination at the end of each differential line.
Advertising