4 auxiliary power, Auxiliary power – ElmoMC Gold Line Digital Servo Drives-Gold Bassoon User Manual
Page 30
![background image](/manuals/558356/30/background.png)
Gold Bassoon Installation Guide
MAN-G-BASIG-EC (Ver. 1.002)
|Auxiliary Power
30
6.4
Auxiliary Power
The Gold Bassoon always requires an external 24 VDC power supply, regardless of whether or not
backup functionality is required.
Pin
Function
Cable
VL+
+24 V Auxiliary Supply Input Positive
Auxiliary Power
VL-
24 V RET Auxiliary Supply Input Return
Auxiliary Power
Pin Positions
2/6-Pin Pluggable 3.5 mm Phoenix Screw Flange
Connector
Table 3: Auxiliary 24 VDC Power Supply Pins and Polarity
Connect the auxiliary 24 VDC power supply as described below.
To connect the 24 VDC power supply:
1.
Use a 24 AWG twisted pair shielded cable. The shield should have copper braid.
2.
The source of the 24 VDC power supply must be isolated from the mains.
3.
For safety and EMI reasons, connect the return of the 24 VDC power supply to the closest
ground (PE) in the power supply side.
4.
Connect the cable shield to the closest ground (PE) near the power source.
5.
Before applying power, first verify that the polarity of the connection is correct.