15 powering up, 16 initializing the system, 15 powering up 6.16 initializing the system – ElmoMC Gold Line Digital Servo Drives-Gold Bassoon User Manual
Page 63
Advertising
![background image](/manuals/558356/63/background.png)
Gold Bassoon Installation Guide
MAN-G-BASIG-EC (Ver. 1.002)
63
6.15 Powering Up
After the Gold Bassoon is connected to its device, it is ready to be powered up.
Caution:
Before applying power, ensure that the DC supply is within the specified range
and that the proper plus-minus connections are in order.
6.16 Initializing the System
After the Gold Bassoon has been connected and mounted, the system must be set up and
initialized. This is accomplished using the EASII, Elmo’s Windows-based software application. Install
the application and then perform setup and initialization according to the directions in the EASII
User Manual.
Advertising