4 leds, Leds – Bosch VIDEOJET X20 User Manual
Page 114
114 en | Appendix
VideoJet X20
V3.5 | 2007.12
Installation and Operating Manual
Bosch Security Systems
8.4
LEDs
The VideoJet X20 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
8.4.1
Power On LED
8.4.2
SFP LED
8.4.3
ETH 1 LED
8.4.4
ETH 2 LED
8.4.5
Connect LED
8.4.6
HDD LED
Does not light up:
VideoJet X20 is switched off.
Lights up green:
VideoJet X20 is switched on.
Does not light up:
No connection.
Lights up yellow:
Connection established.
Flashes yellow:
Data being transmitted.
Does not light up:
No network connection.
Lights up yellow:
Network connection established.
Flashes yellow:
Data being transmitted over the network.
Does not light up:
No network connection.
Lights up yellow:
Network connection established.
Flashes yellow:
Data being transmitted over the network.
Lights up red:
Startup in progress.
Lights up green:
Startup complete, VideoJet X20 is operational.
Flashes green:
Video connection established.
Flashes red:
VideoJet X20 is faulty, for example following failed firmware
upload.
Does not light up:
No hard drive fitted.
Lights up orange:
Hard drive fitted.
Flashes orange:
Hard drive activity.