Bosch VIDEOJET X20 - Manual (Page 96)

96 en | Operation VideoJet X20
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
6.2.5 View Control
Control options for peripherals (for example a pan/tilt camera head or dome camera) depend
on the type of unit installed and on the VideoJet X20's configuration.
If a controllable unit is configured and connected to the VideoJet X20, the controls for the
peripheral are displayed next to the video image.
1. To control a peripheral, click the appropriate controls.
2. Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
6.2.6 Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details (see
Section 5.32 Livepage Configuration, page 85).
6.2.7 Trigger Relay
You can switch connected units using the relays in the VideoJet X20 (for example lights or
door openers).
X
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.