Bosch VIDEOJET X20 - Manual (Page 29)

VideoJet X20 Configuration Using a Web Browser | en 29
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.1.5 Protected VideoJet X20
If the VideoJet X20 is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
1. Enter the user name and associated password in the corresponding text fields.
2. Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
5.1.6 Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the VideoJet X20 must be configured accordingly, otherwise no
communication is possible.
To configure the unit, you must connect the VideoJet X20 directly to a computer using a
network cable. This is because communication via the network is not enabled until the
Identity and Password parameters have been set and successfully authenticated (see
Section 5.28.17 Authentication, page 79).
5.2 Configuration Menu
The SETTINGS page provides access to the configuration menu, which contains all the unit's
parameters arranged in groups.
You can view the current settings by opening one of the configuration screens. You can change
the settings by entering new values or by selecting a predefined value from a list field.
All parameter groups are described in this chapter in the order in which they are listed in the
configuration menu, from the top of the screen to the bottom.
All settings are stored in the VideoJet X20's memory so that they are retained even if the
power supply is interrupted.
i
NOTICE!
The VideoJet X20 offers the option to limit the extent of access using various authorization
levels (see Section 5.6 Password, page 34).
!
CAUTION!
The settings in the configuration menu should only be processed or modified by expert users
or system support personnel.