Bosch VIDEOJET X20 - Manual (Page 101)

VideoJet X20 Operation | en 101
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
6.6.2 Controlling a Playback
You will see a time bar below the video image for quick orientation. If a particular sequence
has been clicked and selected for playback, the selected sequence appears in the list in blue.
The associated time interval is displayed in the bar in gray. A green arrow above the bar
indicates the position of the image currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
1. You can change the time interval displayed by moving the gray area to the left or right
while holding down the mouse button.
2. You can change the time interval displayed by clicking the zoom keys (magnifying glass
icons). The display can span a range from two months to a few seconds.
3. You can select a different sequence for playback by clicking the corresponding gray
marking.
4. If required, drag the green arrow to the point in time at which the playback should begin.
Alternatively you can click directly in the gray time interval or in the timescale to jump to
the position selected in this manner. The date and time display below the bar provides
orientation to the second.
6.6.3 Buttons
You can control playback by means of the buttons below the video image. The buttons have
the following functions:
Start or pause playback
Jump to the start of the active video sequence or
to the previous sequence in the list
Jump to the start of the next video sequence in the list