Bosch VIDEOJET X20 - Manual (Page 63)

VideoJet X20 Configuration Using a Web Browser | en 63
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.22.9 SSL encryption
The data for the connection, for example the password, can be securely transmitted with SSL
encryption. If you have selected the On option, only encrypted ports are offered in the
Remote port parameter.
You can activate and configure encryption of the media data (video, audio and metadata) on
the Encryption page (see Section 5.30 Encryption, page 82).
5.22.10 Auto-connect
Select the On option to automatically re-establish a connection to one of the previously
specified IP addresses after each reboot, after a connection breakdown or after a network
failure.
5.22.11 Audio
Select the On option if you wish to additionally transmit a standalone G.711-encoded audio
stream with alarm connections.
5.22.12 Default camera
Here you can select the camera whose image will be automatically displayed first on the
receiver when the alarm connection is made. Depending on the system configuration, the
receiver can then select the other cameras as well.
i
NOTICE!
Please note that the SSL encryption must be activated and configured at both ends of a
connection. This requires the appropriate certificates to be uploaded onto the VideoJet X20
(see Section 5.35.4 Maintenance log, page 90).
i
NOTICE!
By default, Stream 2 is transmitted for automatic connections. Bear this fact in mind when
assigning the profile (see Section 5.11 Encoder Profile, page 38).
i
NOTICE!
The numbering follows the labeling of the video inputs on the actual unit.