Bosch VIDEOJET X20 - Manual (Page 17)

VideoJet X20 Product Description | en 17
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
3.5 Connections on the Rear Panel
8 ETH 1 RJ45 socket
for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T
9 ETH 1 LED
lights up yellow when the unit is connected to the network via ETH 1
10 ETH 2 RJ45 socket
for a redundant connection to the network or to an iSCSI system
11 ETH 2 LED
lights up yellow when the unit is connected to the network via ETH 2
12 Terminal block
for alarm inputs, relay outputs, serial interface and power supply
13 Power On LED
lights up green when ready for operation
14 Factory reset button
to restore factory default settings
15 Compact Flash slot
for a CF card type I or type II
16 SFP LED
lights up yellow when the unit is connected via SFP
17 SFP slot
for mini-GBIC module
i
NOTICE!
For more information about the LEDs, see Section 8.4 LEDs, page 114.
For terminal block assignment, see Section 8.7 Terminal Block, page 116.