Bosch VIDEOJET X20 - Manual (Page 48)

48 en | Configuration Using a Web Browser VideoJet X20
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
5.17 iSCSI
If you select type iSCSI system as the storage medium, you then need to set up a connection
to the desired iSCSI system and set the configuration parameters.
5.17.1 iSCSI IP address
1. Enter the IP address of the required iSCSI target here.
2. Click the Read button. The connection to the IP address will be established. The iSCSI
LUN Map field contains the corresponding logical drives.
i
NOTICE!
The storage system selected must be available on the network and completely set up.
Amongst other things, it must have an IP address and be divided into logical drives (LUN).