EZWatch Pro 4.0 - Manual (Page 108)

Page | 107 “How To” Guides
•
Facing a camera toward a light source, window, or glass door can result in objects looking too
dark in the camera’s view when it is bright outside. Try to avoid pointing the camera straight at
a light source, out a window, or out a glass door to avoid having some objects too dark to view.
Fig. 140. Avoid facing camera toward bright sources
•
If you are using the typical RG-59 coaxial cable for video, a maximum length of 500 ft.
is recommended. If you need to install the cable farther than 500 ft., a CAT-5 cable and
transmitter is recommended.
► Note Regardless of the length of your video cable, you will still need to
provide power within 100 ft. of the camera using a standard 18/2 power
cable.
•
All cameras are tested before they leave our warehouse, yet any number of things can happen
during shipment. To ensure proper behavior, please test all cameras by connecting them to the
DVR before installing the cameras.
4.4 How To Set Up Internet Access Using EZWatchIP
Fig. 141. EZWatchIP logo
■
Step 1
First, make sure the EZWatch Pro DVR/Camera Server has a connection to the internet.
This can be DSL, Cable, or Dial Up. Make sure you are able to surf the web before moving to Step 2.
■
Step 2
Using the DVR/Camera Server, log on to our EZWatchIP web site at www.ezwatchip.com.
Click on the Sign Up tab and enter in your information following the steps. After you have entered
all your information, click on the download link and save the EZWatchIP Setup program to your
computer. Be sure to remember where you saved this program so that you can find it when you
are ready to run the installation.