Fig. 104. event and action configuration window, Fig. 105. select event window, 1 event configuration – EZWatch Pro 4.0 User Manual
Page 76: 2 assign a camera event
Page |
75
Software User Manual
3.31.1 Event Configuration
There are three sources of events: Camera (video image), Digital Input (device connected to your PC)
and System (condition of your hardware). You can assign multiple events by following the instructions
below.
Insert Event
Step 1
Fig. 104. Event and Action Configuration window
3.31.2 Assign a Camera Event
■
Step 1
Select a channel from the camera list and click the insert event icon.
■
Step 2
There are six types of events: Signal Lost, General Motion, Foreign Object, Missing Object,
Lose Focus, and Camera Occlusion. Select the event you want on the Event Type list.
Step 2
Step 3
Fig. 105. Select Event window
■
Step 3
Click 'OK' to configure the setting of the Event Type. Refer to the following sections.