1 always record, 1 24 hours, always record, 2 non-24 hour, always record – EZWatch Pro 4.0 User Manual
Page 17: 2 record on event, 3 record on motion
16
| Page
Software User Manual
3.1.1 Always Record
3.1.1.1 24 Hours, Always Record
If the default Always Record is selected, the camera will record 24 hours. This selection is denoted by a
solid red indicator line in the Time Table of the Schedule Configuration window, as shown in
Fig. 15
.
3.1.1.2 Non-24 Hour, Always Record
Each camera can be configured to Always Record for a schedule less than 24 hours, e.g., between 6:00
AM and 6:00 PM (18:00).
■
Step 1
Select Camera 2 and press the Configure button in the Schedule Configuration window, as
shown in
Fig. 15
.
■
Step 2
Change the Start Time and End Time to 6:00 and 18:00, respectively, in the Time field set of
the Encoding Options window (
Fig. 16
). Click OK to return to the Schedule Configuration window.
The new Always Record period will be displayed as a (shorter) red indicator line in the Time Table.
3.1.2 Record on Event
Each camera can be configured to Record on Event for 24 hours or any shorter duration. For event
types, please see
3.22 Alarm Event Types, Pg. 66
.
■
Step 1
Select desired camera and press the Configure button in the Schedule Configuration
window (see
Fig. 15
).
■
Step 2
Select the Record on Event option in the Mode field set of the Encoding Options window
(
Fig. 16
). Click OK to return to the Schedule Configuration window. The new Record On Event
period will be displayed as a blue indicator line in the Time Table.
3.1.3 Record on Motion
Each camera can be configured to Record on Motion for 24 hours or any shorter duration.
■
Step 1
Select desired camera and press the Configure button in the Schedule Configuration
window (see
Fig. 15
).
■
Step 2
In the Time field set of the Encoding Options window, adjust the Start Time and End Time
to the desired duration.