33 event - general motion, 1 basic tab – EZWatch Pro 4.0 User Manual
Page 78
Page |
77
Software User Manual
3.33 Event - General Motion
Detect any movement in the defined detection zone.
Fig. 107. Basic tab in General Motion Alarm Event
Configuration window
3.33.1 Basic Tab
Enable Event Check the box to activate.
Automatically cancel event when event disappear The alarm/action will be off once the
abnormality is fixed or ends.
Manually cancel event or event last triggered The alarm/action will continue until being
canceled from the Main Console (Start>Open Event Report>Cancel All Events). The user currently
not at the seat watching the screen will be notified by the alarm.
Cancel event after time-out XX seconds Enable checkbox and setup the time-out seconds to
cancel the event after the time that you set whatever the events disappear or not.
Activated Period Assign the system to activate during a specified time period.