22 alarm event types, 1 general motion, 2 foreign object – EZWatch Pro 4.0 User Manual
Page 67
66
| Page
Software User Manual
3.22 Alarm Event Types
3.22.1 General Motion
General Motion detects all movements in the defined area.
Fig. 91. General Motion setting in Intelligent Search Tool
window
Define Detection Zone Left-click and drag to draw a detection zone. You may define more than
one zone on the screen by repeating the process.
Sensitivity Modify the sensitivity setting by moving the slider. Moving the slider toward the right
increases the sensitivity level, which means a relatively small movement will trigger the alarm.
Conversely, moving the slider toward the left reduces the sensitivity for movement detection.
Setting up an appropriate sensitivity level reduces the frequency of false alarm. For instance, you
can lower the sensitivity to avoid the alarm being triggered by a tree swinging in a breeze.
Interval Move the slider to the right to increase time interval so that the alarm will only be
triggered when the movement is of a longer duration. Move to the left to reduce the time interval.
Stop When Found Check this option to have the video stopped when detecting motion in the
detection zone. Uncheck the option to have video keep rolling, and all detected events will show
on the list in search result box. Click on the listed event in the box to jump to the point in the video
where a motion was detected.
3.22.2 Foreign Object
Foreign Object Alarm is activated when any additional object appears in the defined area on the
screen.