EZWatch Pro 4.0 - Manual (Page 59)

58 | Page Software User Manual
Start
Stop
Port
Fig. 77. Main tab in 3GPP Service panel of Network Service
window
Start Before users can connect, the service must be started. If the server status indicates 'Running’,
the service has already been turned on.
Stop Click this to turn the 3GPP server off. If the server status indicates 'Stopped’, then the service
is already turned off.
Port Assign a port for the clients to connect to your system through the network. The default port
is 554. You can only change the port when the service is stopped.
3.18 Remote Desktop Server
The Remote Desktop server is designed to allow a remote administrator local control over the
computer. The remote administrator can enter commands, perform actions, and control the mouse
as if they are sitting in front of the computer locally. To use this feature, you must install the Remote
Desktop software from your EZ Watch Pro CD. For details, see 3.45.2 Remote Desktop Viewer on Pg. 101 .
3.18.1 Main Tab
The main window allows you to configure the port being used, idle disconnections, and user
authentication.
Port Assign a port for the clients to connect to your system through the network. The default port
is 5140. You can only change the port when the service is stopped.