EZWatch Pro 4.0 - Manual (Page 77)

76 | Page Software User Manual
3.32 Event - Signal Lost
Fig. 106. Basic tab in Alarm Event Configuration window
3.32.1 Basic Tab
Enable Event Check the box to activate.
Automatically cancel event when event disappear The alarm/action will be off once the
abnormality is fixed or ends.
Manually cancel event or event last triggered The alarm/action will continue until it is canceled
from the Main Console (Start>Open Event Report>Cancel All Events). The user currently not at the
seat watching the screen will be notified by the alarm.
Cancel event after time-out XX seconds Enable checkbox and setup the time-out seconds to
cancel the event after the time that you set whatever the events disappear or not.
Activated Period Set up the system to react during a certain time period, for example, during
office hours.