Port mapping – HiRO H50212 User Manual
Page 135
Advertising
User’s Guide
Configuring your Computers
135
25
Port Mapping
The DSL device provides multiple interface groups. Up to five
interface groups are supported including one default group. The
LAN and WAN interfaces could be included. Traffic coming from
one interface of a group can only be flowed to the interfaces in
the same interface group. Thus, the DSL device can isolate
traffic from group to group for some application. By default, all
the interfaces (LAN and WAN) belong to the default group, and
the other four groups are all empty. It is possible to assign any
interface to any group but only one group.
Port Mapping
1. From
the
head
Advance menu, click on Port Mapping. The
following page is displayed:
Advertising