HiRO H50212 - Manual (Page 149)

User’s Guide Configuring your Computers
149
32
SNMP
Simple Network Management Protocol (SNMP) is a
troubleshooting and management protocol that uses the UDP
protocol on port 161 to communicate between clients and
servers. The DSL device can be managed locally or remotely by
SNMP protocol.
SNMP
1. From the head Advance menu, click on SNMP. The
following page is displayed:
Fields on the
first setting
block Description
System
Description System description of the DSL device.
System Contact Contact person and/or contact information for the DSL
device.
System Name An administratively assigned name for the DSL device.
System Location The physical location of the DSL device.
Trap IP Address Destination IP address of the SNMP trap.
Community
name (read-only) Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
Community
name (write-only) Name of the write-only community. This write-only
community allows write operation to the objects
defines as read-writable in the MIB.
Function
buttons Description
Apply Changes Save SNMP configuration. New configuration will take
effect after saving into flash memory and rebooting the
system. See section “Admin” for details.
Reset Reset the configuration.