HiRO H50212 - Manual (Page 138)

User’s Guide Configuring your Computers
138
26
Bridging
You can enable/disable Spanning Tree Protocol and set MAC
address aging time in this page.
Bridging
2. From the head Advance menu, click on Others. The
following page is displayed:
Fields on the
first setting
block Description
Ageing Time Set the Ethernet address ageing time, in seconds.
After [Ageing Time] seconds of not having seen a
frame coming from a certain address, the bridge will
time out (delete) that address from Forwarding
DataBase (fdb).
802.1d Spanning
Tree Enable/disable the spanning tree protocol
Function
buttons Description
Apply Changes Save this bridge configuration. New configuration will
take effect after saving into flash memory and
rebooting the system. See section “Admin” for details.
Show MACs List MAC address in forwarding table.