HiRO H50212 - Manual (Page 8)

802.11n WLAN ADSL2+ Router User’s Guide
8
1
Introduction
Congratulations on becoming the owner of the Wireless
ADSL2+ Router. You will now be able to access the Internet
using your high-speed DSL connection.
This User Guide will show you how to connect your Wireless
ADSL2+ Router, and how to customize its configuration to
get the most out of your new product.
Features
The list below contains the main features of the device and
may be useful to users with knowledge of networking
protocols. If you are not an experienced user, the chapters
throughout this guide will provide you with enough
information to get the most out of your device.
Features include:
 Internal DSL modem for high-speed Internet access
 10/100Base-T Ethernet Router to provide Internet
connectivity to all computers on your LAN
 Network address translation (NAT) functions to provide
security for your LAN
 Network configuration through DHCP Server and DHCP
Client
 Services including IP route and DNS configuration, RIP, and
IP and DSL performance monitoring
 User-friendly configuration program accessed via a web
browser
 User-friendly configuration program accessed via EasySetup
program
Device Requirements
In order to use the Wireless ADSL2+ Router, you must have
the following:
 DSL service up and running on your telephone line
 Instructions from your ISP on what type of Internet
access you will be using, and the addresses needed to set
up access
 One or more computers each containing an Ethernet
card (10Base-T/100Base-T network interface card (NIC))
 For system configuration using the supplied
a. web-based program: a web browser such as Internet
Explorer v4 or later, or Netscape v4 or later. Note that version
4 of each browser is the minimum version requirement – for
optimum display quality, use Internet Explorer v5, or
Netscape v6.1
b. EasySetup program: Graphical User Interface